|
At last an efficient kiln by-product
ventilation system is available. Remove all the smelly stuff from your classroom,
studio or workplace. Once attached to your kiln the kiln vent will remove all the
by-products from your kiln and vent them into the atmosphere. |
| No
1 SMALL KILN VENT FLOOR MOUNT |
|
| 
|
 |
| No 2 LARGE KILN VENT FLOOR MOUNT |
No 3 LARGE KILN VENT ROOF MOUNT |
|
|
| Designed by B & L Tetlow staff and tested exhaustively. Built to industrial
standards so you can expect years of efficient use. |
| Air and fume flow paths are aerodynamically designed to obtain maximum
efficiency. |
| We can provide a kiln vent to suit most kilns. |
| For a demonstration contact our office, (details on Contact page) we have 3 types
available and would be able to demonstrate either. |
| |
| (1) Through roof or wall
terminating at jacks cowl. To be installed in accordance with
standard building regulations. |
| (2) Or through wall or window
louvre. |
| (3) Secondary cooling air creates a
vacuum at roof or floor vents, then draws by-product out of kiln to atmosphere |
| (4) Fan is wired to kiln so it
automatically operates when kiln is switched on. |
| (5) Kiln by-product. |
